Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
- Controls and receptions of safe operation
   Controls and devices
   Information system of the driver (FIS)
   Unlocking and car lock-out
   Illumination and review maintenance
   Seats and niches
   Heater, ventilation and air conditioner
   Automatic transmission (АТ)
   Communication and navigation
   Universal remote radio management HOME LINK®
   Safety systems
   Features of operation and auxiliary systems
   Обкатка
   Trailer towage
   In case of emergency
   Car refuelling
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Seats and niches

Manual adjustment of forward seats

Regulators of position of a seat

The seat can be regulated on many parametres.

Regulators of a seat of the driver

1-longitudinal adjustment of position of a seat
2-adjustment of height of a seat
3-adjustment of an exit lumbar опоры*
4-adjustment of an inclination of a back

Some of the shown controls enter into a complete set only certain updatings or are established to order.

Longitudinal adjustment of a seat

 PERFORMANCE ORDER

  1. Pull the handle (1) upwards, and thus displace a seat in the necessary position.
  2. Release the handle (2) and move a seat to защелкивания a clamp.

Regulation of height of a seat


Podnimanie seats

 PERFORMANCE ORDER

  1. Pull the handle (2) upwards.


Seat lowering

 PERFORMANCE ORDER

  1. Wring out the handle (2) downwards.

Regulation of an inclination of a back

 PERFORMANCE ORDER

  1. Unload a seat back (do not lean against a back).
  2. Regulate an inclination of a back rotation of a flywheel (4).

Regulators of position of a seat (sports seat)

The seat can be regulated on many parametres.

Regulators of a seat of the forward passenger

1-longitudinal adjustment of position of a seat
2-lengthening of a pillow of a seat
3-adjustment of an inclination of a seat
4-adjustment of height of a seat
5-adjustment of an exit lumbar опоры*
6-adjustment of an inclination of a back

Some of the shown controls enter into a complete set only certain updatings or are established to order.

Longitudinal adjustment of a seat

 PERFORMANCE ORDER

  1. Pull the handle (1) upwards, and thus displace a seat in the necessary position.
  2. Release the handle (1) and move a seat to защелкивания a clamp.

Seat pillow


Vydviganie pillows

 PERFORMANCE ORDER

  1. Raise a key (2).
  2. Displace a seat forward and establish a pillow in the necessary position.


Zadviganie pillows

 PERFORMANCE ORDER

  1. Raise a key (2).
  2. Displace a seat back and establish a pillow in the necessary position.

Adjustment of an inclination of a seat

 PERFORMANCE ORDER

  1. Pull the handle (3) upwards and change seat position, unloading and loading with its body weight.

Regulation of height of a seat


Podnimanie seats

 PERFORMANCE ORDER

  1. Delay the handle (4) upwards (swing).


Seat lowering

 PERFORMANCE ORDER

  1. Wring out the handle (4) downwards (swing).

Regulation of an inclination of a back

 PERFORMANCE ORDER

  1. Unload a seat back (do not lean against a back).
  2. Regulate an inclination of a back rotation of a flywheel (6).

Electric adjustment of forward seats

Regulation of position of a seat

The principle of management of regulators corresponds to a design and seat function.

Forward seat: position regulators

A-regulation of position of a seat
V-adjustment of an inclination of a back
S-adjustment of an exit lumbar опоры*

Forward seat: a regulator

Controls of regulation of position of seats on the arrangement, design and a functional purpose correspond to a seat design. Regulation of position of a seat is carried out according to the given logic by pressing of switches.

Seat giving forward/back

 PERFORMANCE ORDER

  1. Press the switch (A) forward or back (1).

Seat lifting/lowering

 PERFORMANCE ORDER

  1. Delay/press the switch () upwards or downwards.

Lifting/lowering of a forward part of a pillow

 PERFORMANCE ORDER

  1. Press the switch () upwards or downwards (2).

Lifting/lowering of a back part of a pillow

 PERFORMANCE ORDER

  1. Press the switch (A) upwards or downwards (3).

Regulation of an inclination of a back

Forward seat: a regulator of an inclination of a back

 PERFORMANCE ORDER

  1. For lifting or back lowering press the switch forward or back in the directions specified by arrows.

Exit of a lumbar support

 PERFORMANCE ORDER

  1. The exit of a lumbar support provides a support of lumbar department of a backbone on all natural contour.


Camber adjustment

 PERFORMANCE ORDER

  1. For выдвигания upholsteries press the forward party крупноформатной buttons ().
  2. For убирания upholsteries press the back party of the button ().


Height adjustment

 PERFORMANCE ORDER

  1. For upholstery displacement upwards press the top party of the button ().
  2. For upholstery displacement downwards press the bottom party of the button ().

The lumbar support provides прилегание lumbar department of a backbone on all its natural contour, with the landing which is not tiring even at long trips.

Memory of position of a seat of the driver

The description

Located at doors of the driver memory keys it is possible to program and reproduce four various variants of position of a seat and external зеркал*.

Door of the driver: a memory

Memory keys

Keys of a memory 1, 2, 3 and 4 it is possible to program and reproduce a maximum four various variants of position of a seat and external зеркал*.

Key STOP

The memory of position of a seat is disconnected by pressing of key STOP. Inscription OFF being near to key STOP (it is visible only at included light) Thus burns.

All entered positions remain in memory. Position of a seat and external зеркал* thus can be regulated only in the usual way - by means of the electric drive. The memory is recommended to be disconnected pressing of key STOP at incidental using the car the driver and consequently absence of need of programming of position of a seat for it.

The programmed positions can be reproduced also by means of remote radio management, see more low.

Programming of positions

At programming and reproduction of all functions should be pressed key STOP (is drowned).

 PERFORMANCE ORDER

  1. Adjust position of a seat of the driver, see above.
  2. Adjust position of both external mirrors, Illumination and review maintenance see.
  3. Press and keep key МЕМО. In addition press and keep not less than 1 second one of memory keys.
  4. Release keys. The given position is entered now into memory and corresponds to number of the key chosen at input.

At each new programming on the same key there is a dump of the previous data. At programming it is recommended to begin with a key 1, leaving for other drivers on one of other keys.

At lock-out of the car by a radio key (remote radio management) last position of a seat and mirrors is entered into memory. The given position of a seat and mirrors automatically is reproduced remote radio management at the subsequent unlocking of the car. Position of external mirrors is reproduced right after unlockings, and position of a seat of the driver after opening of a door of the driver.

Thus however there is no dump of the data of a memory undertaken before distribution on keys 1-4. At any moment reproduction of the entered positions by corresponding keys is possible.

Reproduction of positions

The programmed positions can be reproduced both memory keys, and remote radio management (radio key).

Reproduction by memory keys

 PERFORMANCE ORDER

  1. At an open door of the driver unitary press a corresponding key of a memory.
  2. At the closed door of the driver press and keep a corresponding key of a memory while the seat and external mirrors will not occupy the programmed position.

Reproduction by remote radio management

 PERFORMANCE ORDER

  1. Unlock the car remote radio management and within the next 10 minutes open a door of the driver.

If after car unlocking by remote radio management the door of the driver remains closed during 10 minutes seat position reproduce memory keys.

Radio key programming

For reproduction of the entered positions by remote radio management it is necessary to program a radio key on a memory key.

Radio key programming on a memory key

 PERFORMANCE ORDER

  1. Corresponding key of a memory to which there should correspond the given key, reproduce the programmed positions.
  2. Press and keep the given key and within 10 seconds in addition press the button of unlocking of a radio key.
  3. After approximately 2 seconds, release a key.

Cancellation of programming of a radio key on a memory key

 PERFORMANCE ORDER

  1. Press and keep key МЕМО and within 10 seconds in addition press the button of unlocking of a radio key.
  2. After approximately 2 seconds, release key МЕМО.

At reprogramming there is an automatic dump of the previous data.

It is recommended to program, that the key 1 corresponded to one, and a key 2 - to other factory radio key. Through contractual partner Audi if necessary it is possible to get two more others of a radio key and to program on keys 3 and 4.

Headrests

Headrests of forward seats

Correctly established headrests in a combination to the fastened seat belt provide effective protection.

Forward seat: a headrest

Headrest lifting

 PERFORMANCE ORDER

  1. Undertake for боковины a headrest both hands.
  2. So adjust headrest position that the headrest upper edge was a minimum at level or above level of eyes.

Headrest lowering

 PERFORMANCE ORDER

  1. Undertake for боковины a headrest both hands.
  2. Press the button (A) and so adjust headrest position that the headrest upper edge was a minimum at level or above level of eyes.

Inclination regulation

 PERFORMANCE ORDER

  1. Undertake for боковины a headrest both hands and wring out it forward or back.

Removal of headrests

 PERFORMANCE ORDER

  1. Pull a headrest against the stop upwards.
  2. Press the button (B) and take a headrest.

Installation of headrests

 PERFORMANCE ORDER

  1. Insert and move headrest bars into their fixings directing till the moment.

Headrests are regulated on height and an inclination. They should be established on growth. Correctly established headrests in a combination to seat belts provide effective protection.

The optimum protective effect is provided at a finding of an upper edge of a headrest a minimum at level or above level of eyes.

Headrests of back lateral seats

Headrest of a back lateral seat

Headrest lifting

 PERFORMANCE ORDER

  1. Undertake for боковины a headrest both hands.
  2. So adjust headrest position that the headrest upper edge was a minimum at level or above level of eyes.

Headrest lowering

 PERFORMANCE ORDER

  1. Undertake for боковины a headrest both hands.
  2. Press the button (A) and so adjust headrest position that the headrest upper edge was a minimum at level or above level of eyes.

Removal of headrests

 PERFORMANCE ORDER

  1. Pull a headrest against the stop upwards.
  2. Press the button (B), and simultaneously take a headrest.

Installation of headrests

 PERFORMANCE ORDER

  1. Insert and move headrest bars in directing before click.

Average headrest of a back seat

Headrest lifting

 PERFORMANCE ORDER

  1. Undertake for боковины a headrest both hands.
  2. So adjust headrest position that the headrest upper edge was a minimum at level or above level of eyes.

Headrest lowering

 PERFORMANCE ORDER

  1. Undertake for боковины a headrest both hands.
  2. Press the button () and so adjust headrest position that the headrest upper edge was a minimum at level or above level of eyes.

Removal of headrests

 PERFORMANCE ORDER

  1. Pull a headrest against the stop upwards.
  2. Press the button () and simultaneously take a headrest.

Installation of headrests

 PERFORMANCE ORDER

  1. Insert and move headrest bars in directing before click.

Armrest

In многоступенчато an adjustable armrest there is a ware compartment.

Forward dividing armrest

Regulation of position of an armrest

 PERFORMANCE ORDER

  1. For inclination regulation take away an armrest completely downwards.
  2. Lift an armrest, passing the fixed positions up to the necessary.

Opening of a ware compartment

 PERFORMANCE ORDER

  1. Press unlocking button.

Remember that at the armrest lowered against the stop mobility of a forearm is limited. Therefore at movement on a city do not lower an armrest.

Luggage carrier

Luggage carrier loading

Luggage subjects should be correctly and are reliably placed.

Heavy subjects place as it is possible further ahead

In interests of preservation of good dynamics of the car remember the following:

  1. Distribute cargo how much it probably in regular intervals.
  2. Heavy subjects place as it is possible further ahead.
  3. With the help грузоудерживающей сетки* or not elastic tension tapes fix luggage subjects for lifting eyes.

Pressure of air in tyres should correspond to car loading; see a label of pressure of air in tyres a door rack, Specifications see.

Lifting eyes

For fastening of subjects of luggage in a luggage carrier there are four lifting eyes.

Arrangement of lifting eyes of a luggage carrier

 PERFORMANCE ORDER

  1. By means of lifting eyes fix cargo.
  2. Accept security measures, safety Systems see.

The grid interferes with displacement of easy cargo.

 PERFORMANCE ORDER

  1. Pass in the beginning forward hooks in lifting eyes.
  2. Then pass back hooks in lifting eyes.

Gruzouderzhivajushchaja grid/ukladochnaja a grid

The grid interferes with displacement of easy cargo in a luggage carrier and can be used also in quality укладочной grids.

Suspended for hooks грузоудерживающая a grid

Gruzouderzhivajushchaja grid

 PERFORMANCE ORDER

  1. Fix a grid for four lifting eyes.

Ukladochnaja grid

 PERFORMANCE ORDER

  1. Pass hooks укладочной grids in the lifting eyes located in the bottom of a back of a luggage carrier.
  2. By means of a plate take away downwards located in the top part of a luggage carrier fixing hooks (A), pull a grid upwards and fix loops грузоудерживающей grids for hooks.

Hooks can be used also for suspension of bags, packages etc.

If hooks are not used, they come back independently in a starting position.

Protective covering-bath

At transportation of the polluted subjects it is necessary to use a protective covering-bathroom.

Раскладывание a protective covering-bath

The straightened sheeting in a luggage carrier

 PERFORMANCE ORDER

  1. Open a luggage carrier cover.
  2. Pull a key (A).
  3. Straighten the combined covering (C).

Opening of a cover of the through hatch

 PERFORMANCE ORDER

  1. Open a luggage carrier cover.
  2. Pull a key (B).

Sheeting of a put back of a back seat

Sheeting of the combined back of a back seat

 PERFORMANCE ORDER

  1. Combine a back of a back seat forward, see more low.
  2. Lay a covering (D) on the combined back of a back seat.

The protective covering-bath of a luggage carrier represents a put synthetic covering to which if necessary can cover all luggage carrier, including racks of shock-absorbers. The sheeting of a back of a back seat can use also separately, without use of a protective covering-bath of a luggage carrier. The back covering consists of two parts and can develop in the ratio 1/3 and 2/3.

Put a protective covering-bath only the dry.

Lateral niche

In the left lateral niche of a luggage carrier there is a CD player (CDROM) for system навигации*.

Luggage carrier: the CD player of system of navigation under a cover of a lateral covering

For opening pull the handle forward.

The CD player (CDROM) for navigation system is in a luggage carrier niche. The description of using is resulted by a player in the corresponding operation manual.

Increase in the sizes of a luggage carrier

For increase dimensional a luggage carrier it is possible to put forward both components of a back together or separately.

Back folding

The unlocking handle of a back

 PERFORMANCE ORDER

  1. Wring out in an arrow direction unlocking handle (A).
  2. Combine a back forward.

Back returning in a starting position

 PERFORMANCE ORDER

  1. Take away a back back till the moment of its reliable fixing. At correct fixing of a back the red label of a pin () should not be visible.

Back lock-out

 PERFORMANCE ORDER

  1. Turn to the right inserted into the lock of the unlocking handle.

Back unlocking

Back lock-out

 PERFORMANCE ORDER

  1. Turn to the left inserted into the lock of the unlocking handle a key.

Correctly fixed back of a back seat (normal position) can be locked and unlocked only the basic or emergency key (the lock is in the unlocking handle). Thanks to it undesirable penetration into a luggage carrier from car salon is prevented.

At back returning in a starting position watch, that seat belts of lateral seats were in лентонаправляющем a trench. Otherwise belts can get to the back lock that can lead to their damage.

Ware shelf

The ware shelf behind a back of a back seat can be used for easy subjects of clothes.

Remember that subjects rubbing about back glass can damage system of its electroheating.

For maintenance of normal air exchange do not cover with things the exhaust cracks which are on a joint of back glass and a ware shelf.

The through loading hatch with a cover

Using the through loading hatch with a cover adjoining it, it is possible to transport lengthy subjects in salon (for example, skis), without being afraid for their safety, cleanliness and serviceability.

Loading

Fragment of the back party of a back seat: a cover of the loading hatch

 PERFORMANCE ORDER

  1. Open a luggage carrier.
  2. In a luggage carrier press the button of unlocking of a cover of the loading hatch (the marksman illustrations) and take away a cover downwards.
  3. Take away forward a back dividing armrest.
  4. In salon wring out downwards the button of unlocking of a cover of the loading hatch and release a cover.
  5. Take and straighten a cover.
  6. Insert skis or other similar subjects through a luggage compartment into a cover which is in salon.

Fastening

Fastening of a cover by a belt in the lock of the central back seat

 PERFORMANCE ORDER

  1. Insert a cover belt (A) into the lock of a seat belt of the central seat (B).
  2. Hardly pull a belt for its free end (C).

Cover refuelling into place

 PERFORMANCE ORDER

  1. Close in a luggage carrier a cover of the loading hatch.
  2. Accurately combine a cover and fill it into place.
  3. Close in salon a cover.

Do not put a wet cover after using it.

Luggage carrier on a roof

Car gutters are executed in a roof with the account of tap of storm drains. Therefore do not use the usual luggage carriers intended for installation on a roof of the car.

In case of use of other systems of fastening of a luggage carrier on a roof or at its installation not on the instructions which have arisen in this connection damage to guarantee repair are not subject.

Fastening points

Luggage carrier on a roof крепите only in the marked places.

Points of fastening of basic arms of a luggage carrier

Installation

At installation of basic arms watch, that they have precisely entered between arrows of a marking in a condensing ledge of a roof. Labels are visible only in public.

Loading on a roof

Cargo on a roof should be reliably fixed. By transportation cargo dynamic properties of the car change.

The safe load on a roof of your car makes 75 kg. Loading on a roof is defined by the sum of weight of system of fastening and cargo.

At use of systems of fastening with smaller load-carrying capacity it is impossible to use completely a safe load on a roof. To load a luggage carrier it is possible only to specified in the instruction on its installation of a limit.

Luggage carrier on a roof remove right after usings. On high speed the expense of fuel because of increase in aerodynamic resistance increases.

Coasters

Forward coaster

Coaster

 PERFORMANCE ORDER

  1. For opening press a cover of a coaster with a symbol.
  2. For coaster installation in a starting position push it completely back till the fixing moment.

Coasters in a forward dividing armrest

Forward dividing armrest

Coasters in an armrest

Armrest opening

 PERFORMANCE ORDER

  1. Press the button on an armrest.

In a forward dividing armrest it is possible to place no more than two bottles of a drink.

Coasters in a back dividing armrest

Coasters in a back dividing armrest

Opening of coasters

 PERFORMANCE ORDER

  1. For opening press a symbol (A).

Installation of the holder

For installation of the corresponding holder (B) deblock its pressing in a direction of an arrow and simultaneously adjust position.

So adjust position of the holder that it densely adjoined to a drink.

In a dividing armrest it is possible to place no more than two bottles of a drink.

Ashtrays

Forward ashtray

The central console: an open ashtray

Ashtray opening

 PERFORMANCE ORDER

  1. Press a forward lath of an ashtray (A).

Insert extraction

 PERFORMANCE ORDER

  1. Take an insert (B) for lateral deepenings and take it upwards.

Insert installation

 PERFORMANCE ORDER

  1. Establish an insert in a nest pressing.

Back ashtray

Ashtray opening

 PERFORMANCE ORDER

  1. Open a cover.

Insert extraction

 PERFORMANCE ORDER

  1. Take the case for an open cover and take upwards.

Insert installation

 PERFORMANCE ORDER

  1. Open a cover of an insert and press an insert against the stop in a nest.

Cigar Lighter and sockets

Cigar Lighter

Located in a nest прикуривателя the socket on 12 volt can use for connection of additional electrodevices.

Cigar Lighter the central console

Using прикуривателем

 PERFORMANCE ORDER

  1. For cover opening прикуривателя press the marked place.
  2. Cigar Lighter joins утапливанием a cartridge.
  3. Wait cartridge pushing out.
  4. After that at once take lighter from a nest.
  5. Light a cigarette from the heated heating spiral прикуривателя.
  6. Establish lighter in a nest.

Use as the socket

 PERFORMANCE ORDER

  1. For cover opening прикуривателя press the marked place.
  2. Take lighter.
  3. Establish the electrodevice tip in a nest прикуривателя.

Located in a nest прикуривателя the usual socket on 12 volt can use for connection of additional electrodevices with power consumption no more than 100 watt.

Use only suitable tips not to damage the socket.

Remember that at the idle engine and the included consumers of the electric power there is an accumulator category.

The socket

The socket on 12 volt can use for connection of additional electrodevices.

Fragment of a lateral covering of a luggage carrier: the socket on 12 volt

 PERFORMANCE ORDER

  1. For access to the socket press a cover.
  2. Establish the electrodevice tip in the socket.

The socket is calculated on electrodevices with power consumption no more than 100 watt.

Apply only suitable tips not to damage the socket.

Remember that at the idle engine and the included consumers of the electric power there is an accumulator category.

Niches

The list of niches

In various places of the car there is a set of niches.

In your car there are following niches:

  • The first-aid set (In case of emergency)
  • Sign on an emergency stop (In case of emergency)
  • Ware box (coolings of a ware box, CD-changer)
  • Case of the central console
  • Niche for storage of a folder with car documents
  • Niches of doors
  • Крючья for clothes (hanger)
  • Niche for storage of audiocassettes
  • Ware shelf (Seats and niches)
  • Niche a lateral covering of a luggage carrier (the Seat and a niche)

Some of the resulted niches enter into a complete set only certain updatings or are established to order.

Ware box

The ware box can be locked, and at an open cover box illumination joins.

Opening of a ware box

 PERFORMANCE ORDER

  1. Pull the handle located in a cover in a direction of an arrow and open a cover downwards.

Closing of a ware box

 PERFORMANCE ORDER

  1. Close a cover that it was fixed.

Illumination of a ware box joins at opening of a cover and the included headlights / lay fires.

In a cover of a ware box there are clamps for fastening of writing-materials.

CD-changer *

Radio system CD-changer is in a ware box. The description is resulted in the corresponding operation manual.

Refrigerator in a ware box

The cooling effect of a refrigerator is reached only in a mode of cooling of the conditioner.

Ware box with an open refrigerator

 PERFORMANCE ORDER

  1. Open a ware box.
  2. Open a refrigerator.
  3. Cooling vkljuchaetsja/is switched off by the rotary switch (A).

The cooling effect of a refrigerator is reached only at included in a mode of cooling the conditioner. At conditioner work in a mode of heating the refrigerator is recommended to be switched off.

Located in a refrigerator «противоскользящий the rug» can be taken and used for cleaning.

Case

Case of the central console

 PERFORMANCE ORDER

  1. For opening press a cover.
  2. For closing push a case completely back till the fixing moment.

In the central console near to a manual brake there is one more compartment. On cars with system навигации* in the given compartment the control panel is located by system.

Niche for storage of a folder with car documents

Always store a folder with car documents in the niche intended for it.

Niche in facing of doors

In internal facing of doors niches are located.

Hangers (крючья for clothes)

Over each of back doors the hook for clothes is located.

Niche for audiocassettes

Audiocassettes can be stored (without cases) in the sliding compartments cleaned in a niche intended for them.

Niche for cartridges of the central console

 PERFORMANCE ORDER

  1. For compartment opening press the button.
  2. The cartridge lay in a compartment the open party upwards.
  3. For closing push a compartment completely back till the fixing moment.

At a cartridge finding in a compartment on the left side of a compartment there is a red label.

Blocking of coils prevents spontaneous unwinding of a tape and by that its deformation.

Ware boxes of forward seats

From the face party of each of forward seats there is a sliding ware box.

Opening

 PERFORMANCE ORDER

  1. Raise the handle of a box and put forward it.

Closing

 PERFORMANCE ORDER

  1. Completely insert a box till the moment of its fixing.

The maximum loading of a box makes 1 kg.