Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation стеклоомывателя a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
   + The salon equipment
+ Onboard electric equipment



The external equipment

Installation of the forward panel in position for maintenance service

1 — the Forward panel
2 — the Top cover of the engine, left
3 — the Top cover of the engine, right
4 — the Screw, 10Нм
5 — the Screw, 50Нм

3369 — service Position: Screw special tool AUDI in apertures in a bumper. Instructions: If the specified special tool available is not present, it is possible to apply 2 screws M8 х 90. Under a bolt head it is necessary to enclose washers in diameter of 24 mm and thickness of 2 mm. Besides, 2 plugs in length of 80 mm and 17 mm are necessary diameter.

At carrying out of some adjusting works, for example, with клиновым or a gear belt the forward panel should be established in position for обслуживния. Thus the panel is displaced together with a radiator forward.

 PERFORMANCE ORDER

  1. Disconnect air lines (1) and (2) between the forward panel and the air filter on the forward panel (arrows on сопр. Illustrations).
  1. Remove the top cover of the engine at the left (2) and on the right (3), address to an illustration in the section beginning.
  2. Disconnect the bottom cover of the engine ahead, without removing it. For this purpose turn on only 3 screws.
  3. Remove a forward bumper, address to corresponding Section.
  1. Screw in two top apertures on the right and at the left the special tool 3369.
  1. Turn out screws (5) at the left and on the right, address to an illustration in the section beginning.
  2. Turn out screws (4) at the left and on the right.
  1. Pull forward the forward panel so that the back aperture on the panel has been closed by a forward carving aperture on a wing. In this position screw at the left and on the right a bolt (the marksman on an accompanying illustration) and fix the panel.