Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation стеклоомывателя a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
   + The salon equipment
+ Onboard electric equipment



Door adjustment

Check: the Forward door

 PERFORMANCE ORDER

  1. Check up backlashes in interface of a forward door. Backlashes should be uniform on all perimetre прилегания to a body.

    And — 3.5 0.5 mm
    In — 4.5 0.5 mm
    With — 0 1.0 mm

The back door should be adjusted.

Check: the Back door

 PERFORMANCE ORDER

  1. Check up backlashes in interface of a back door. Backlashes should be uniform on all perimetre прилегания to a body.

    And — 4.5 0.5 mm
    In — 3.5 0.5 mm
    With — 0 1.0 mm

The back door should be adjusted.

Adjustment

 PERFORMANCE ORDER

  1. Loosen the screws of fastening of a clamp of the lock.
  1. Door adjustment in a longitudinal direction: Loosen the screws of fastening of loops (arrow) to a rack And (3) (a back door: a rack (so that the door (2) with loops (1) could move in grooves.

To some screws of fastening access is available only from within. For this purpose it is necessary to remove at first the bottom upholstery on a rack And or V.Na is shown an accompanying illustration the bottom loop at the closed door.

  1. Door adjustment in a longitudinal direction: Expose a door according to the set backlashes and tighten screws of fastening of loops the moment 32Нм.
  2. Door adjustment in a cross-section direction, 1 reception: Loosen the screws of fastening of loops (arrow) so that it was possible to displace a door (2) with loops in grooves. Expose a door so that its contour was заподлицо with adjoining elements of a body. It concerns first of all a forward part of a door. In a back part the door is regulated for the account of a clamp of the lock. Screws of fastening of loops tighten the moment 32Нм.
  1. Door adjustment in a cross-section direction, 2 reception: In a back part of a door adjustment is carried out for the account of a clamp of the lock (1).

Labels (arrows а/с) are applied to lateral adjustment, a label (an arrow b/d) for adjustment on height.

  1. Loosen the screws (2) also displace a lock clamp. Adjust a clamp so that the door stood a little outside.
  2. Cautiously close a door so that was заподлицо with adjoining elements of a body, and the lock clamp correctly came into the lock.
  3. Tighten screws of fastening of a clamp of the lock the moment 25Нм.