Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation стеклоомывателя a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
   + The salon equipment
+ Onboard electric equipment



Removal and installation of the lock of a door

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

  1. Remove a door upholstery, address to corresponding Section.
  2. Remove a frame of a door with стеклоподъёмником from a door, address to Sections Removal and installation of a frame of a window of a forward door and Removal and installation стеклоподъёмника.
  3. Disunite a socket of the lock of a door.
  1. At installation of the old lock: Disconnect приводную a bar (3) at the handle of a door (1) of the holder of a clip (2).
  1. At installation of the new lock of a door: Displace the plug (4) downwards and take out приводную a bar (3). (5) – a lock pin, (6) – the lock tear up.
  1. Turn out 2 bolts (1) and take out the lock (3) downwards from a door. (2) – a lining.
  1. Disconnect a cable (5) drives of a door at the lock and at the uncoupling lever (4).

Installation

 PERFORMANCE ORDER

  1. Connect a cable (5) drives of a door to the uncoupling lever (4), turn on 90 (marksman) and connect to the lock.
  2. Insert the lock into a door and fix its moment 20Нм.
  1. At installation of the new lock: Insert a bar of a drive (3) into the plug (4). For fixing displace the plug upwards. Take out a lock pin (5) of the lock (6).
  1. At installation of the old lock: Connect приводную a bar to the door handle, address to Section Removal and installation of the handle of a door.
  2. Join a socket of the lock of a door.
  3. Put a frame of a door with стеклоподъёмником on a door, address to Section Removal and installation of the electric motor of a drive стеклоподъёмника.
  4. Establish a door upholstery, address to corresponding Section.
  5. Attach a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.