Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation стеклоомывателя a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
   + The salon equipment
+ Onboard electric equipment



Removal and installation of facing of a door of a back (Versatile person)

The bottom facing

Removal

 PERFORMANCE ORDER

  1. Open a door of a back and remove a lamp of illumination (1), address to Section Removal and installation of plafonds of internal illumination.
  1. Open a cover in facing (3), release the holder and take out warning sign.
  1. Turn out 4 screws (2).
  1. Remove by means of an exhaust hook 3370 or HAZET 2520-1 top facing on the right and at the left from the holder of a clip).
  1. Take out cautiously 6 spring clips (4) of a door of a back and remove facing (3).

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in sequence, return to removal. Thus watch that facing was included into a cover at the lock of a door of a back.

Facing of a back window

Removal

 PERFORMANCE ORDER

  1. Open a door of a back and remove the bottom facing of a door of a back.
  1. Turn out 2 screws (1).
  1. Disconnect on 2 spring clips (3) from sides from a back door. (4) – a rubber emphasis.
  1. Take out 4 spring clips (3) above from a door and remove facing (2).

Installation

 PERFORMANCE ORDER

  1. Watch correct position of eight rubber emphasis.
  2. Establish facing at first on each side, and then above.
  3. Fix facing at first above in apertures of a door of a back, then on each side.
  4. Fix facing by two screws.