Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   + The external equipment
   - The salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of a lay brake
      Removal and installation of a cover of the lever of switching of transfers/selectors
      Removal and ashtray installation
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and cover installation on a control panel
      Removal and pocket installation from outside the driver
      Removal and installation of a ware box
      Removal and installation противосолнечного a peak
      Removal and installation of facing of a rack And
      Removal and installation of the top facing of a rack In
      Removal and installation of the bottom facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Versatile person)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment








Removal and installation of the central console

1 — the Central console
2 — a switching Overlay
3 — the Cover
4 — Screws
5 — the Cover under the lever of a lay brake
6 — the Connecting element

7 — Screws
8 — Screws
9 — Screws
10 — Screws
11 — the Nut, 26Нм
12 — Nuts, 26Нм

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

  1. Tighten a lay brake.
  2. Remove facing of the lever of a lay brake, address to Section Removal and installation of facing of the lever of a lay brake.
  3. АТ: Move the selector back.
  4. Uncover the lever of switching and remove the lever.
  5. Remove a forward and back ashtray, address to Section Removal and ashtray installation.
  6. Remove the central armrest if it is established, address to Section Removal and installation of the central armrest.
  7. Remove a radio receiver, address to Section Removal and radio receiver installation / the navigating device/CD-changer.
  8. Remove the control panel a heater/conditioner, address to Section Removal and installation of the block of management by a heater/conditioner.
  9. Disconnect from the central console an overlay of switching (2), address to Section Removal and installation of the holder of drinks.
  10. Take out from the central console the right and left covers (3) and turn out screws of fastening around an arrangement of feet.
  11. Take out by means of a plastic wedge a cover (5) of the central console under the lever of a lay brake.
  12. Depending on model disunite a socket прикуривателя or the block of management of navigation.
  13. Turn out 2 screws of fastening (7) at a connecting element (6) and take out a connecting element.
  14. Turn out 2 screws (8) under an ashtray.
  15. Turn out 4 screws (9), and also 2 screws (10) fastenings of the central console (1).
  16. The car with the central armrest: Turn away a nut (11).
  17. Turn away 2 nuts (12).
  18. Pull the central console (1) back and remove from a floor.

The central console separates hardly.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in sequence, return to removal. Thus nuts (11) and (12) are tightened by the moment 26Нм.
  2. Attach a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.