Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Diagnostics of malfunctions of an onboard electric equipment - the general information
   Рассоединение sockets
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Check of stoplights
   Removal and installation of a sound signal
   Removal and installation of gauges of a parking
   Replacement of the battery of a remote control of the ignition key
   The relay and safety locks
   Replacement of lamps накаливания devices of external illumination
   Removal and installation of headlights
   Removal and installation of the lateral repeater of turns
   Removal and installation of an additional stoplight
   Removal and installation of a back lantern
   Removal and installation of a lantern of illumination of licence plate
   Removal and installation of plafonds of internal illumination
   Removal and control panel installation
   Removal and installation подрулевого the switch
   Removal and installation of switches of a forward door
   Removal and installation of the switch of light
   Removal and switch installation стеклоподъёмника in a back door
   Removal and installation of the switch of a cover of a luggage carrier
   Removal and installation of the switch of a lay brake
   Removal and installation of the switch of illumination of a ware box
   Removal and installation of switches of the central console
   Removal and radio receiver installation / the navigating device/CD-changer
   Removal and installation of loudspeakers
   Removal and installation of aerials
   Removal and installation of the tank of a liquid of the stekloomyvatelja/electric motor of the pump
   Removal and installation of the electric motor of a cleaner of a windscreen
   Removal and electric motor installation on back glass (Versatile person)
   The uniform lock - the general information
   Removal and installation запорного an element of a cover of a fuel tank
   The digital tyre of given CAN
   + Basic schemes of an electric equipment



Removal and installation of plafonds of internal illumination

The exhaust hook is necessary for removal of a plafond of internal illumination, for example, 3370 or HAZET 2520-1. It is possible to apply To this purpose also a plastic wedge, for example, HAZET 1965-20 (address to an illustration more low).

 PERFORMANCE ORDER

  1. Switch off the switch of a corresponding plafond.
  2. Switch off ignition.

Forward ceiling plafond/plafond of illumination for reading

 PERFORMANCE ORDER

  1. Extend by means of a hook a cover of a plafond and remove it.
  1. Turn out screws (arrows on an accompanying illustration).
  1. Lower a forward plafond downwards and take out from an adjusting aperture in a ceiling.
  2. Disunite a plafond socket.
  3. Installation is carried out in sequence, return to removal.

Lamp replacement накаливания a plafond of illumination for reading

 PERFORMANCE ORDER

  1. Press a lamp (1) and (2) into a cartridge, turn and take out. Replace a lamp with the new.

Lamp replacement накаливания a ceiling plafond

 PERFORMANCE ORDER

  1. Take out by means of a hook рассеиватель a ceiling plafond and remove it.
  1. Take out софитную a lamp (1) and (2) of a cartridge and replace with the new.

Back plafond of illumination for reading

 PERFORMANCE ORDER

  1. Take out by means of a hook a plafond from an adjusting aperture in a ceiling.
  2. Disunite a lamp socket.
  3. Installation is carried out in sequence, return to removal.

Lamp replacement накаливания

 PERFORMANCE ORDER

  1. Press a lamp from a plafond underside, turn and take out it. Replace a lamp with the new.

Lamp of illumination of a ware box

Some lamps, for example, a lamp of a door signalling device, a lamp of illumination of an input, a forward lamp of illumination of area of feet and a lamp of illumination of a luggage carrier (sedan) are taken out similarly to a lamp of illumination of a ware box.

 PERFORMANCE ORDER

  1. Lamp of illumination of a ware box: Open a ware box.
  1. Take out a lamp (2) by means of a plastic wedge, for example, HAZET 1965-20 of an adjusting aperture. Thus put a wedge in a groove. (1) – a lock lath.
  1. Disunite a socket (3) lamps.
  2. Installation is carried out in sequence, return to removal. Thus insert a lamp from outside the tip into an aperture and fix on the other hand.

Lamp replacement накаливания

 PERFORMANCE ORDER

  1. If necessary, cast away upwards a cover from a lamp underside (the marksman on an accompanying illustration).
  1. Take out a lamp from a cartridge and replace with the new.

Plafond of illumination of a cargo compartment (Versatile person)

 PERFORMANCE ORDER

  1. Take out a plafond by means of a hook from an adjusting aperture in a ceiling.
  1. Disunite a lamp socket.
  1. Installation is carried out in sequence, return to removal.

Lamp replacement накаливания

 PERFORMANCE ORDER

  1. Put a screw-driver at a groove, hook and remove рассеиватель.
  1. Take out софитную a lamp from a cartridge and replace with the new.

Plafond of a door of a back (Versatile person)

 PERFORMANCE ORDER

  1. Take out by means of a hook a plafond from an adjusting aperture in a direction of movement of the car (the marksman on an accompanying illustration).
  1. Disunite a lamp socket.
  1. Installation is carried out in sequence, return to removal. Thus insert a plafond into an aperture and an aperture and fix its clips.

Lamp replacement накаливания

 PERFORMANCE ORDER

  1. Take out a reflector (1) from an underside of a plafond (2) and then софитную a lamp. Replace a lamp with the new.

Back plafond of illumination of area of feet

 PERFORMANCE ORDER

  1. Shift a plafond towards a car outer side (the marksman on an accompanying illustration) and take out it from an adjusting aperture.
  1. Disunite a lamp socket.
  2. Installation is carried out in sequence, return to removal. Thus a lamp insert into an aperture штекерной the party.

Lamp replacement накаливания

 PERFORMANCE ORDER

  1. Release lock laths (arrows on an accompanying illustration), hook from an underside and uncover.
  1. Take out a lamp from a cartridge and replace its new.

Plafond of illumination of a cosmetic mirror

 PERFORMANCE ORDER

  1. Put a screw-driver in a groove, hook and take out a plafond from an adjusting aperture in a ceiling.
  2. Disunite a lamp socket.
  3. Installation is carried out in sequence, return to removal. Thus insert a lamp into an aperture for штекерной the party and fix from an underside.

Lamp replacement накаливания

 PERFORMANCE ORDER

  1. Cast away a cover from a plafond underside (the marksman on an accompanying illustration) and take out софитную a lamp from a cartridge. Replace a lamp with the new.

Illumination of the handle of a door

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

  1. Remove a door upholstery, address to Section Removal and installation of facing of a forward door.
  1. Take out a lamp (1) of the holder on a door upholstery.
  1. Disunite a socket (2) lamps.
  2. Installation is carried out in sequence, return to removal. Thus insert a lamp into an adjusting aperture and fix.